ESP Marketing(UK) Ltd ProductInfomation

ESP Marketing (UK) Ltd

3 Boleness Road

WISBECH

Cambridgeshire

PE13 2RB

Telephone: 01945 580980

Fax: 01945 466549

E-Mail: dave@espmarketing.co.uk

PROFILE SANDING MOULDINGS & SHAPES

ESP Marketing
19 Silver Street, WITCHAM, Cambs. CB6 2LF
Tel: 01353 777305 Fax: 01353 777848
E-Mail: espmarketing@btconnect.com
Internet: http//home.btconnect.com/ESP-Marketing

2943 Profile Sanding System
Easy to use abrasive system for half round and curved profiles Easy change abrasive cost effective against grit wheels

ÿþ2943 STRETCH CLOTH forUSE with VELCRO FACED PROFILED POLYBLANKS
An easy solution to sanding curved profiles and bullnoses with the advantage of minimum
down time when renewing abrasive. Full details for wheel preparation available on facts sheet.
Description Size Grit Price
2943 Stretch Cloth 640mm x 1000mm 100, 120, 150 £58.13 per Linear Metre
Velcro 500mm x 700mm £52.47 per Piece
Balco 67 Heat Resistant Contact Adhesive 425 grms £17.70 per Tin
Polyblank Wheel 180mm x 50mm x 38.1mm bore £29.50 each
(supplied with plastic bushes to fit spindles from ½" to 1¼")
Steel Fixing Plates to fit Spindle £20.50 per pair
For CNC Router mounting
12.7 - 25 mm shank, 50mm spindle and pair of steel bushes £43.75 per set
Starter Packs
3 Pieces 640mm x 500mm of 2943 Stretch Cloth one of each grit 100, 120, 150 or your choice
1 Piece Velcro 250mm x 700mm
1 Tin Balco 67 425 grams Contact Adhesive
1 Polyblank Wheel 180mm x 50mm x 38.1mm bore plus Steel Bushes to fit your Spindle.
Total Value £181.15 Offer Price £126.79
For CNC includes
2 Pieces 640mm x 1000mm of 2943 Stretch Cloth choose from grits 100, 120, 150
1 Piece Velcro 500mm x 700mm
1 Tin Balco 67 425 grams Contact Adhesive
2 Polyblank Wheels 180mm x 50mm x 38.1mm bore with two sets of CNC Router mountings
Total Value £332.47 Offer Price £232.75

The above are designed to be used on motors running at speeds up to 1500RPM. Fixed above
or below a table with or without a conveyor.
A further use for this type of sanding system is for sanding on CNC routers and similar
machining centres. Provided each head is dedicated to one profile and is maintained as a
matching tool to the cutter and has an accurately machined shaft, these heads are very
adaptable and give excellent results.

Air Blower with Magnetic Clamp
When these wheels are used with a feeder, the cutting surface is likely to become very hot with
continuous use. The use of an air blower to cool at the interface helps to control this problem
and prevent burning. The magnetic base has an articulated arm with rotary lock.
Price £59.75

Slidex Lubricant helps to prevent burning on cutter heads. Environmentally friendly in Aerosol
cans
Price £9.50

ESP Marketing (UK) Ltd

3 Boleness Road

WISBECH

Cambridgeshire

PE13 2RB

Telephone: 01945 580980

Fax: 01945 466549

E-Mail: dave@espmarketing.co.uk